system
 
 

PRODUCT SPECIFICATION

 

GEYSER GUARD is a risk management and peak power load shedding system.

 

RISK MANAGEMENT:
Insurance Companies
Burst geysers are a common problem and often the greatest loss experienced is the consequential damage of the water flooding.
When a water leak is detected by GG’s water sensor, the system will shut off the mains water supply as well as the power to the geyser
GG can be linked to a back end 24/7 monitoring center, where all water leak alarms will be received and remedial actions taken.

 
 

ACTUALS

The consumer is able to switch their geyser ON or OFF remotely via the web or smartphone app.
GEYSER GUARD allows the user (or management company to offer the customer) a simple, easy to install – stable system, which will not only ensures water leak prevention, but allow the client to have hot water on demand at all times, without the need to leave the geyser on for unnecessary periods.
Water safety, risk prevention and power management which takes a plumber 45min to install.

 
 

POWER Management

The WEB and Smartphone App allows the consumer to set and manage the hot water heating on their geyser. Proper management will result in reduced energy consumption.

 
 
 
mobile_app_2
 
 

HARDWARE & SOFTWARE SPECS

 

GSM

  • Telit GL865-Dual Band
  • GPRS Class 10
  • GSM 900/1800 MHZ
  • ICASA ApprovedTA-2011/154
 

Smart Phone Application

  • Switch Geyser on and off
  • Set Geyser Timers
  • Graphs of Energy consumed
  • Table of energy day/week/month
  • Geyser Status
 

HARDWARE & SOFTWARE SPECS

 

Power Profile

Input Power – 220V AC (Max 286V)
Geyser Power Rating Switch – 220V AC 20A
Output Control Power – 12V DC 2VA
GSM and Control Circuit Power – Switch mode Power Supply 3.8V DC

 

Web Application

  • Information Available
    Power consumed, day/week/month
    Power Comparisons to previous
    Geyser Status
    Graphs of Power on cycles
  • Actions available
    Switch Geyser on and off
    Set timers for energy savings
 
mobile_app_3
 
arm-cortex-a15
 
 

Processor Control

ARM 32bit Cortex Processor
Real Time Clock

 

Inputs and Outputs

1 x Sensor INPUT – Water Sensor to pick up leaks
2 x Valve OUTPUT – Open and Close OUTPUT
1 x Reset Switch INPUT

 
 

Valve

2 way actuated Ball Valve
12V DC Actuator
Fixed State Control

 

Sensor

5V DC Resistive sensor

 

LED Indicator Lights

Valve Open/Close | Sensor state

 
ballvalve
 
 
team_image
 

 

 
 
team_image
 

 

 
 
team_image
 

 

 
 
team_image